|Min. Order:||1 Others|
|Delivery Time:||45 Days|
Model No.: OSIP
Material: Sandwich Panel
Usage: Warehouse, Villa, Dormitories, Temporary Offices, Workshop
Place of Origin: Dalian China
HS Code: 94061000.00
Port: Dalian China
SIPs are high performance thermal efficient composite panels which consist of a sandwich of two layers of structural board with an insulating layer of foam in between for walls, roofs and floors in new residential and commercial buildings.
B. Design theory:
product_1Structural Insulated Panels (SIPs) have become a widely used alternative construction material for homes and other buildings. While many types of Composite Panel building systems have been developed, SIPs now usually refers to panels made from a thick layer of foam (polystyrene or polyurethane) sandwiched between two layers of Oriented Strand Board (OSB), plywood or fiber-cement. The result is an engineered panel that provides structural framing, insulation, and exterior sheathing in a solid, one-piece component.
The basic design concept for SIPs is elegant in its simplicity, and offers several advantages for constructing walls and roofs. Bonding the foam core to the stiff outer skins creates a web-and-flange structural strength (along the same principal as an I-beam) across the length and breadth of the panel. With the capacity to handle axial, bending, racking, and shear loads, properly designed and assembled SIPs not only replace conventional framing, but will withstand high wind, and seismic forces.
C. Advantages to use EPS Foam Sandwish Panels:
High quality construction method.
Comfortably warm, clean, and quiet.
Equal or lower first costs.
Lower long term operating costs.
Incentives available from utility service provider for energy efficient design.
Lower maintenance costs for you.
Construction Process Benefits
Easy to construct, with short learning curve.
60% shorter construction time
Quick turnaround time for greater satisfaction.
Increased builders production capacity.
50% less framing lumber.
50% more energy efficient.
Requires less room at building site (less site disturbance).
Less construction waste.
SIPs are prefabricated systems used primarily for walls and roofs. SIPs employ composite materials, reduce waste through modular construction methods, achieve high insulation
E. OSB Facing Structural Insulated Panels Specification:
Facing: 7/16`` (11.1mm) Canadian OSB (for both side), Exposure 1, APA certified;
Core: 1.2 lb/c.f (20kg/ m3) EPS, fire retardant.
Glue: Certified Structural Adhesive from U.S.A.
Other facing such as fiber cement board, gypsum board can also be the facing, Call for quotation.
No charge for standard edge routs specified with order. Standard routs are flush, 3/4", 1 1/2" or 3". OSB spline routs available for $2.00 per panel as specified.
Electrical chases available for $2.00 each per panel. Chases must be specified prior to lamination.
All panels can be precut to greatly save the onsite labor cost for USD 0.9/sf. (pls note the footage is based on the raw material will be used)
F. Thermal Performance of the Quacent SIP System:
The Quacent SIP s System provides wall and roof assemblies with higher overall (effective) thermal resistance (R-value) than other conventional construction methods. The overall R-value of a building assembly includes the effect of thermal bridges as a result of framing members and is a measure of its ability to resist heat flow through it. The higher the overall R-value of a building assembly, the lower the long-term energy costs will be for heating and cooling.
The table below provides typical R-Values of OSB Board Structural Insulated Panels in different thickness:
leakage rate for a building (quantified in terms of air changes per hour) is often used to determine the energy efficiency of building construction. Air leakage rates vary widely for different types of house construction with values of 0.2 acph or lower achievable for energy efficient house construction using the Quacent SIP System.
The combined high overall R-Value and low air leakage characteristic of buildings built with the Quacent SIP System results in significantly lower energy costs versus other construction methods such as wood frame construction.
Contact Person: Lei Song
Address: No. 10 Quannan Street, Free Trade Zone ,Dalian,Liaoning